Wednesday, 17 February 2010
Friday, 16 October 2009
Wednesday, 22 July 2009
|
| Speaker problems! Needhelp27 09:43:41 |
| | I don't know what happened. My speakers are hooked on the back, nothing seems
out of place but when I press the POWER button, nothing happens. It simply
doesn't turn on ( the little green light is out! ). I don't know what to do!
Can somebody please help me? I'm getting desperate.
PS. I have a Windowns XP Home Edition ( Compaq ) and my speakers are FLC
Presario Speaker System.
|
| |  7 answers | Add comment |
Wednesday, 24 June 2009
|
| Wyse WT3125SE BIOS Configs Guest 13:35:54 |
| | hie there got a wyse model wt3125se thats not powering up\
i nid to copy an image from the other working wyse (same model) using a Wyse Firmware USB Imaging tool but cant get to change the Boot Order...i need help?
masiyaos |
| | Add comment |
Friday, 19 June 2009
|
| Acer Scanner 4300U/3300U Installation Alan C. Brown 09:44:30 |
| | I have a new Toshiba Satellite Pro M70 laptop with Win XP Pro SP2 (fully
updated).
I have a VuegoScan flatbed scanner (equivalent I think to Acer 4300U/3300U
&/or Benq S2W 4300U/3300U), which I had intended to install with the latest
scanner software update (mirascan_v403u10b.exe - 9.2MB), which I downloaded
from the internet.
However I inadvertantly connected the scanner to the laptop, and turned it
on before installing the scanner software, with the result that Windows XP
automatically detected the scanner. In Device Manager under Imaging Devices,
it shows up as Flatbed Scanner_23, Manufacturer : Acer Peripherals, and the
"Driver File Details" tab lists 11 drivers.
Question is, can I/should I install the scanner software that I downloaded ?
Are there any bad consequences in doing so?
How should I go about it ?
Would I be able to revert to the Windows scanner drivers if the software
installation fails ?
Would appreciate any advice.
Thank you
Alan C. Brown
|
| | 8 answers | Add comment |
Wednesday, 4 March 2009
|
| Dell laptop inspiron 8200 Jose J Alvarez 20:20:55 |
| | I have a Dell inspiron 8200 1.8 GHz 128 MB Sdram , 40 gig H.D , NVidia
GeForce2 Go with 64MB. I turn on the computer this morning to find out , it
couldn't boot to windows, it saids there is not HD on this laptop. Here the
message =*** Stop:0x0000000f4 (0x00000003,0x82170B00,0x805FA7A8". i can also
hear a sound like a clock "click, click, click, click, coming from the HD
everytime i boot the computer . This laptop is only 2 years old and i think
not sure but the HD is gone south but any help will be appreciated.
P.s Also if i need a new HD, where can i find one for this laptop ? thanks
|
| | 6 answers | Add comment |
Thursday, 30 October 2008
|
| Re: Guest 22:58:33 |
| | On Mon, 22 Nov 2004 21:13:42 GMT, "Noozer" <dont.spam@me.here> wrote:
Without seeing the rest of the thread, I'd look for the following in a>mainboard...> - Socket 939 AMD64 compatible>- NON Via chipset>- Onboard gigabit NIC>- Onboard 6+ channel sound>- Sata onboard>- Firewire onboard>- USB 2> ...and the nice to have's...> - PCIe slots>- Onboard nVidia video + AGP slot (so board can be reused later as server,>etc.)> I'd avoid ASRock and MSI and look at Asus or ECS (depending out how much>cash you have available)>
Thanks
You don't like VIA?
|
| | 706 answers | Add comment |
Thursday, 23 October 2008
|
| Tuner Prolinka Kafar 23:52:50 |
| | Dostaіem w spadku tuner Prolink Pixelview PV-CL548XP+
Taki dziwak- na zі±cze PCI razem z grafik± CirrusLogic 8MB. Jak odpalam
system to znajduje mi tylko grafike- i to z bulem ona chodzi bo pisze їe
sterownik nie obsіuguje trybu wielomonitorowego, a juї mam Radzia na AGP. Co
dziwne w tym tunerzez nie ma їadnego ukіadu Conexanta BTXXX, jest tylko
cirrusLogic CL-PX4072.
Program do ogl±dania TV i virtualDub zgіaszaj± bі± їe nie znaleziono
sterownika TV- zainstalowaіem wszystko z pіytki, z ktуr± dostaіem Tuner i
nic- wogуle їadnego urz±dzenia Video nie wykryі.
Spotkaіsiк kto¶ kiedy¶ z podbn± kart±??
Mozna ten zabytek jako¶ zmusiж do wspуіpracy??
Dziкki i pozdrawiam.
|
| | Add comment |
Sunday, 6 January 2008
|
| Sound card drivers? Mark 18:18:52 |
| | I'm looking for drivers (Win98 - WinXP) for an Xwave A571-T20 PCI Sound
Card. About an hour of searching the web has turned up nothing.
Thanks.
|
| | 3 answer | Add comment |
Wednesday, 12 September 2007
|
| Reformat Ohmygod 22:16:12 |
| | I have inherited a computer that is infected by viruses & would like to
format the HDD and reload windows again.
What is the easiest way to do this?
Thanks
|
| | 43 answer | Add comment |
Friday, 10 August 2007
|
| system recovery Dh 20:08:26 |
| | My PC hangs at the point right after detecting the drives during bootup.
Is it having trouble on locating the MBR?
It just have a CHKDSK recovery performed by WinXP and it works fine.
How to solve this problem?
I dont have a WinXP CDROM with me.
I left it at home.
Thanx a lot
|
| | 2 answer | Add comment |
Monday, 30 April 2007
|
| RE: XP SP2 Crashes on reboot when installed on Maxtor D740X-6L Hard Dr Andrew E . 02:38:58 |
| | I dought if thats even vaguely related,youre cloned/mirrored os probably was
its fault,as to the other,running CHKDSK C: /R In recovery probably would
fix that.
"Rob" wrote:
I have discovered a problem after a week of trouble shooting. When you > install Windows XP SP2 on a system that uses a Maxtor D740X-6L HDD the PC > will crash on the first reboot after install of XP SP2. I had this problem > on 2 completely different PCs. The first was a Dell Dimension 4500 the other > was a clone PC the only hardware in common was the Maxtor D740X-6L HDD. The > Dell had the 40GB version and the Clone had the 20GB version.> The Systems both would crash with only Windows XP Pro and Windows updates > installed. No other third party software was installed before XP Service > Pack 2. The Dell was able to boot to safe mode only but the Clone was > unrecoverable and would not boot to any available options. After multiple > reinstalls of both PCs I started changing out hardware. Video - Crash, > Memory- Crash, Network Cards - Crash, I even changed the Main board on the > Dell - Crash. After changing the Hard drive on the Dell to a Seagate all was > well! So I tried swapping out the drive in the clone with an old Fujitsu > drive and Hallaleujah it booted! I had previously run chkdsk with a full > scan for bad clusters and both drives came up clean.> So if you plan on installing XP SP2 on your PC and you have a Maxtor > D740X-6L BE AFRAID, BE VERY AFRAID! and BACK UP Everything. Because you will > most likely be reinstalling everything to a new hard drive. > |
| | 2 answer | Add comment |
Wednesday, 14 February 2007
|
| Error Rajani 13:02:33 |
| | hello,
Till now my windows XP is working fine. Suddenly, getting error message
"This file is not alowed in dos mode(cmd.exe)
cannot access autoexec.nt " with cancel and ignore buttons.
Even if u click cancel or ignore, its still displaying. What could be the
problem?
I restarted, shutdown and checked, the same message.
thanx in advance
|
| | 10 answers | Add comment |
Saturday, 13 January 2007
|
| WIndows XP Pro 64 + USB Mass storage device problems. Ri0t 15:34:19 |
| | The problem I am having (one of many)with this OS is my USB mass
storage device(s) are not being assigned a driver letter. The Drive
mounts and is reconized by the system. Using Admin tools "disk
Management" options I am able to see the mass storage device etc
etc...when I attempt to assign a drive letter it will not open the
option to choose a drive letter. The submenu closes without any errors
or info. In device manager I can also see the device and thier are no
conflicts. I have tried uninstalling and reinstall same thing happens
again. I disabled my SCSI RAID in device manager hoping that
re-installing also might fix this. The OS now is not able to detect the
SCSI RAID. So I am stuck other than re-installing the OS (upgrade) to
attempt to fix the problem.
PS I am at work so I dont have any system info at hand and can not
recall it from memorey will post latter if it is super important. I do
have a SATA 1 drive if that helps but no other specifics etc. Thanx in
advance for any help any one could offer.
|
| | 1 answer | Add comment |
Saturday, 30 December 2006
|
| webcam Katie 00:00:44 |
| | i have a webcam(trust-120spacacam) and i have installed the driver (i dont
have a cd) and still i get the message " a web has not been detected. verify
that your camera is plugged in". can anyone please help me finding the
problem because i still cant use the webcam?
|
| | 17 answers | Add comment |
Wednesday, 27 December 2006
|
| testing Sooty 17:09:59 |
| | testing only...
thanks
|
| | 31 answer | Add comment |
Friday, 15 December 2006
|
| CD/DVD Drive not seeing blank discs Jon Ven 09:29:56 |
| | When loading a blank disc for burning, Windows Explorer tells me:-
'D:\ is not accessible. Incorrect function'
The drive will happily play a video CD or DVD but does not like blank discs.
Does anyone have a cure for this problem?
JV
|
| | 4 answer | Add comment |
Friday, 8 December 2006
|
| USB cable and its use Ritter197 04:28:21 |
| | I have a desktop and a laptop, both with Windows XP and fairly fast GHZ
CPU's.
I have followed the instructions very carefully and in the device manger I
see on both computers the Bridge USB.
Yet, when I click on the desktop icon for PCConnect it does bring up the
PCLinq (that's how they spell it) but I see only local machine. When I try
Connect it does not connect to the other machine.
Connections on the USB side are ok (on the desktop I am going through a Hub.
What is it I am missing here?
|
| | 37 answers | Add comment |
Friday, 13 October 2006
|
| two beeps Guest 16:52:08 |
| | I keep getting two beeps on my CAP810 motherboard.
I think the manual says this means:
Parity cannot be reset
What does this mean?
|
| | 4 answer | Add comment |
Wednesday, 6 September 2006
|
| How to... Vb 01:14:41 |
| | Here is a link http://www.cash4action.com/auto/join.html?homas
It is help you to earn more than $200 a week, 6000 a month.
The Most Importation: It's Free.
Your work is: read E-mails only. |
| | 7 answers | Add comment |
Wednesday, 16 August 2006
|
| dysl 250GB problem keraM 01:08:49 |
| | Witam pewnie wiele razy bylo zadawane to pytanie:
mianowicie nowoczesna plyta GB nie wiem jaka dokladnie bo to nie moj sprzet
w kazdym razie dysk segate SATA 250GB w biosie i win xp sp2 widzi jak 130GB
co mam zrobiФ aby windows widzial cale 250gb? pozdrawiam
|
| | Add comment |
|
| S uchawki do Skype? Robert Zawodny 01:02:15 |
| | Witam.
Jakie s uchwki do Skype polecacie w cenie do max. 50 z .
Zale y mi na wygodzie u ywania i jako ci dzwi ku.
--
Robert Zawodny
"Nie ma z ego tytoniu, tak jak nie ma brzydkich kobiet." (Albert Einstein)
|
| | 4 answer | Add comment |
Tuesday, 15 August 2006
|
| D-LINK DWL-G650+ drivery od US-ROBOTICSA Darkblue 16:20:51 |
| | jak w temacie. gdzie znajde manual ktora wersje driverow od us-roboticsa dac
zamiast oryginalnych od d-linka coby przypieszyc prace karty D-Link
DWL-G650+ ?prosze o ile to mozliwe o info na GG: 11118
|
| | 1 answer | Add comment |
|
| Test laptopa Ground21 00:23:30 |
| | Witam.
Jak najszybciej i najlepiej sprawdzic stan techniczny laptopa?
Czy dobrze mysle: uzyc programu producenta dysku na test hdd? Ale juz na
512mb ramu memtest bedzie chyba zbyt powolny? Musze to zrobic dosyc
sprawnie? Pozatym, na co zwrocic uwag przy zakupie?
--
Ground21____________\\
ground21@pocztaKROPKAfm
|
| | 3 answer | Add comment |
|
